Single Sided Thermal Break Tape

b金博宝188备用地址;et188在线登录ECHOtape热断带是为公司设计的nstruction professionals who want to reduce thermal bridging on outer and inner framing in metal buildings. Used primarily in the installation of metal building panels and prefabricated wall panels, this tape is applied over the top of purlins or on girt flanges to act as a barrier or flash break between the outer shell and inner framing. This tape adheres strongly to both smooth and rough surfaces including corrugated metal. The paper release liner protects the adhesive from contaminants when the tape needs to be cut to specific lengths for use in tight spaces ensuring a strong bond once applied.

  • Single-Sided-Thermal-Break-Tape-FO-V2348-FO-V2344
  • FO-V2344/FO-V2348 | Single Sided Thermal Break Tape Roll #2 | ECHOtape


  • Use to create a vapor seal where large gaps occur
  • Use to make a lap joint seal on corrugated metal building panels or prefabricated wall panels
  • Use to create a flash break on metal building purlin and girt flanges

Features & Benefits

  • Easy unwind for fast application
  • An initial quick-stick helps speed up application
  • Excellent holding power and high load capability provides long term reliability
  • Conforms well to a variety of irregular surfaces
  • Helps maintain a seal in high movement joints
  • Die-cuts easily for custom sizing
  • Can be custom converted to accommodate a full range of projects


¼ in x 2 in x 50 ft
¼ in x 3 in x 50 ft
1/8 in x 2 in x 75 ft
1/8 in x 3 in x 75 ft

Technical Data

Carrier PVC Foam
Adhesive Acrylic
Release Liner #70 Polycoated Paper
Total Thickness 1/4” (FO-V2344) | 1/8” (FO-V2348)
Tensile 60 PSI
Adhesion 20 oz/in
Service Temperature -20°F to 130°F (-29°C to 54°C)
Elongation 120%
Color Gray
Compression Deflection 5 PSI
R Value 1.15 (1/4”) | .576 (1/8”)
Holding Power >24 hours @ 2.2psi load, R.T.